X Tipi Asılır Tandem Diskli Tırmık
The X-type suspended tandem disc harrow is used in field and garden cultivation to prepare seedbeds and seedling beds. It shreds plant stalks and residues left in the field after harvest and mixes them into the soil. It breaks up clods formed in the field after using tools such as ploughs, harrows and cultivators and loosens the soil. Thanks to its three adjustable hangers, it can be used comfortably even in wooded areas.
It is an X-type suspended machine that incorporates organic and inorganic fertilisers into the soil, thereby aerating and loosening the soil and maintaining the balance of the soil’s water and temperature conditions.
Hoşunuza gidebilir…
Asılır Tip Offset Diskaro
The suspended type offset disc harrow is a suspended machine favoured in garden farming and small plots due to its ease of use. The disc direction angles can be easily adjusted on the front and rear batteries.
It is used in secondary soil cultivation, seedbed preparation, inter-tree cultivation in horticulture, weed control, and mixing fertiliser into the soil. It shreds plant stalks and residues left in the field after harvest and mixes them into the soil. It breaks up clods formed in the field after using implements such as ploughs, harrows, and cultivators and loosens the soil.
It is a machine that incorporates organic and inorganic fertilisers into the soil, thereby aerating and loosening the soil and maintaining the balance of the soil's water and temperature conditions.
Diskli Pulluk (ADP)
The disc harrow is a suspended soil cultivation machine primarily used for soil preparation in preparing the seedbed after harvest, attached to the tractor with a three-point linkage system.
Disc harrows operate with the discs rotating in the working position, so they do not get stuck on obstacles. In sandy and stony fields, disc wear is less than that of mouldboard ploughs. As they operate by rotating, they do not require excessive traction power from the tractor and do not strain it. It is a machine with simple settings and easy operation.
Advantages of using a disc plough:
*In moist soils worked with disc ploughs, the wavy structure of the furrow bottom prevents mud formation in the soil.
*The concave structure of the discs breaks up the soil more effectively, preventing clod formation.
*As the discs operate by rotating, they easily overcome obstacles such as stones and hard plant roots, preventing potential breakdowns and blockages.
*As the force distribution related to soil resistance is spread over a wide surface area on the discs, they are resistant to high forces in terms of strength and are not easily damaged.
*As the edges of the discs are sharpened from the outside, they rub against the sharp edge of the plough wall during operation and gradually sharpen themselves over time.
Üç Askılı Çift Denge Tekerlekli Vanvey
The Vanvey is a second-class soil cultivation machine. These are tools inserted into the field after ploughing, specifically to prepare a ploughed field for sowing. The process of breaking up the clods created by the plough to make the field surface more suitable for sowing is called double ploughing.
The three-point, dual-balance wheeled Vanvey is a suspended soil cultivation machine used for soil cultivation such as subsoiling and triple tillage in fields that have been left fallow for a year after being ploughed, as well as for breaking up weeds in vineyards, gardens and fields and aerating the soil.
The purpose of using a vanvey is to:
*Prepare the seedbed by breaking up the soil sufficiently.
*Kill weeds in fallow farming methods and preserve moisture accumulation in the soil by preventing evaporation from the soil.
*Break up plant debris on the soil surface and ensure that organic debris in the topsoil layer mixes with the soil.
*To break up the crust layer and sometimes partially compact the soil, thereby creating better soil conditions and accelerating germination.
İlgili ürünler
Asılır Tip Merdane
Hanging and drawn rollers are used on small plots. Their primary function is to compact the soil. They are used to crush and break up clods that cannot be broken up by soil cultivation tools and to level the field surface. Rollers can be used on the field before and after sowing. When inserted before sowing, they crush the clods of the tilled field, compact the soil, and create a balance between air pockets, regulating the soil's water-air ratio and preparing a good seedbed.
After sowing, they help increase the contact between the seeds and the soil, bringing the water in the lower layers closer to the area where the seeds are located, thus aiding germination.
The materials used in rollers undergo all kinds of inspections and pass through a testing phase before reaching the manufacturing stage, and high-quality materials are used.
Thanks to its design, it is a machine with simple settings and extremely easy to use.
Optional 390 mm and 340 mm diameter flywheels can be fitted.
It can be used both suspended and towed thanks to a pin.
The profiles on the roller flywheels and gear create small depressions on the soil surface, increasing water retention and reducing surface runoff.
Dal Kesme Makinesi
It shreds the stalks of plants such as wheat, sunflower, cotton, corn, and rice, as well as tree branches left behind after harvesting in orchards, vineyards, and fields into small pieces, thereby increasing soil fertility.
It prevents yield loss after stubble burning.
It provides long and enjoyable blade usage thanks to its high-strength blades.
The retaining blades placed in front of the roller enable the re-cutting of long pieces.
The branch cutting size can be adjusted thanks to the side rails on the equipment and the height-adjustable roller.
Hydraulic shifting facilitates ease of use in gardens and under trees.
Front guard plates enable easy cutting by laying down long plant stems.
540 rpm PTO; transmission system with 2000 rpm rotor speed.
Vibcom (Tohum Yatağı Hazırlayıcı)
Vibcom is a two- or three-row seedbed preparation machine that combines multiple soil cultivation operations in a single pass at high speed. It is the right choice for warming the seedbed before spring. The choice of machine configuration ensures versatility in use. It is adjustable to a depth of up to 17 cm. It is manufactured in various working widths ranging from 2.5 metres to 8 metres.
The model with three rows of vibrating snake tongues (ideal for clay soils) prefers dense and shallow sowing, allowing the soil surface to warm up and aerate before sowing without mixing the deep soil. The double-row model with 25 cm wide claw shoes achieves an aggressively tilled, fragmented surface layer.
Vibcom ensures a perfectly level area, enabling rapid seedbed preparation and creating the ideal conditions for uniform crop establishment.
Yaylı Ayaklı Diskli Tırmık (SDH)
The spring-loaded disc harrow, with its spring-loaded independent disc structure and machine construction, performs a more effective cutting and mixing process than conventional disc harrows, with each disc operating independently thanks to its separate bearing. The springs on each disc prevent breakages and damage to the frame by allowing the discs to move back and forth when encountering an obstacle. It is less affected by the unevenness of the terrain. It causes almost no damage to the levelling of the terrain. In addition, the roller attached to the chassis presses the soil lifted by the discs at the same time, minimising moisture loss after the process. The machine can operate comfortably in heavy clay soils.
Değerlendirmeler
Henüz değerlendirme yapılmadı.