Dikey Yaylı Otomatik Pulluk
₺45.000,00
Ağır Hizmet Tipi Yaylı Kültivatör
₺55.000,00
Tek Yaylı Kültivatör
₺40.000,00
İlgili ürünler
Asılır Tip Merdane
Hanging and drawn rollers are used on small plots. Their primary function is to compact the soil. They are used to crush and break up clods that cannot be broken up by soil cultivation tools and to level the field surface. Rollers can be used on the field before and after sowing. When inserted before sowing, they crush the clods of the tilled field, compact the soil, and create a balance between air pockets, regulating the soil's water-air ratio and preparing a good seedbed.
After sowing, they help increase the contact between the seeds and the soil, bringing the water in the lower layers closer to the area where the seeds are located, thus aiding germination.
The materials used in rollers undergo all kinds of inspections and pass through a testing phase before reaching the manufacturing stage, and high-quality materials are used.
Thanks to its design, it is a machine with simple settings and extremely easy to use.
Optional 390 mm and 340 mm diameter flywheels can be fitted.
It can be used both suspended and towed thanks to a pin.
The profiles on the roller flywheels and gear create small depressions on the soil surface, increasing water retention and reducing surface runoff.
Asılır Tip Offset Diskaro
The suspended type offset disc harrow is a suspended machine favoured in garden farming and small plots due to its ease of use. The disc direction angles can be easily adjusted on the front and rear batteries.
It is used in secondary soil cultivation, seedbed preparation, inter-tree cultivation in horticulture, weed control, and mixing fertiliser into the soil. It shreds plant stalks and residues left in the field after harvest and mixes them into the soil. It breaks up clods formed in the field after using implements such as ploughs, harrows, and cultivators and loosens the soil.
It is a machine that incorporates organic and inorganic fertilisers into the soil, thereby aerating and loosening the soil and maintaining the balance of the soil's water and temperature conditions.
Çizel Pulluk
Ploughs are used for soil cultivation after harvest without the need for a plough in the field. Due to the structure of their legs, they break the plough layer and are a suspended machine that performs shallow soil cultivation during dry summer months when ploughing is not possible.
Ploughing at a high working depth can be achieved with the plough. This allows the soil to aerate, prevents rainwater from pooling on the surface, draws water to the base, preserves soil moisture, and breaks up the hard layer, enabling plant roots to grow freely towards the base. This work increases yield.
İtalyan Tip Rotovatör
The Italian-type rotary tiller is a suspended machine that tills the soil without leaving raw soil between its legs due to the structure of its legs, breaking the plough layer and tilling the soil without bringing the infertile soil in the lower layer to the surface. Italian-type ploughing allows for soil cultivation at a high working depth. This promotes soil aeration, prevents rainwater from pooling on the surface, allowing water to be drawn to the base and preserving soil moisture, and breaks up the hard layer, allowing plant roots to grow freely towards the base. This work increases yield. Additionally, the roller attached to the chassis presses the soil lifted by the discs simultaneously, minimising moisture loss after the operation.
Katlanır V Tipi Offset Goble Diskli Tırmık
Hydraulic lift-equipped folding V-type offset disc harrows are trailed machines used to cut and shred crop residues (maize, sunflower, wheat, etc.) and weeds after harvest, and to break up the crust layer.
After harvesting, it prepares the field for direct sowing without the need for another agricultural machine by performing stubble-free soil cultivation during dry months when ploughs cannot be used. In addition to this feature, it can be used for cultivating soil with high moisture content.
The LGD - KV model offset disc harrows move with a hydraulic system and, due to their multi-directional movement capability, prevent wind and water erosion while breaking up stubble. The mechanism on the wheel ensures that the wheel runs at ground level, allowing the working depth to be effectively adjusted.
It has a greater working width than other soil cultivation machines. It is much more economical than other soil cultivation machines because it has a higher working speed and greater working width. Due to these features, fuel, time, labour, maintenance and spare part costs are lower. It reduces the share of soil cultivation in the total cost.
Hydraulic cylinders are used to enable the wings to open and close in working and road positions, allowing tools with a working width greater than three metres to be transported on roads. This enables easy transport in a folded position on roads and narrow transport routes.
Değerlendirmeler
Henüz değerlendirme yapılmadı.