SPRING – LOADED LEG DISK HARROW SDH
The spring-loaded disc harrow, with its spring-loaded independent disc structure and machine construction, performs a more effective cutting and mixing process than conventional disc harrows, with each disc operating independently thanks to its separate bearing. The springs on each disc prevent breakages and damage to the frame by allowing the discs to move back and forth when encountering an obstacle. It is less affected by the unevenness of the terrain. It causes almost no damage to the levelling of the terrain. In addition, the roller attached to the chassis presses the soil lifted by the discs at the same time, minimising moisture loss after the process. The machine can operate comfortably in heavy clay soils.
Hoşunuza gidebilir…
CHISEL PLOUGH
Ploughs are used for soil cultivation after harvest without the need for a plough in the field. Due to the structure of their legs, they break the plough layer and are a suspended machine that performs shallow soil cultivation during dry summer months when ploughing is not possible.
Ploughing at a high working depth can be achieved with the plough. This allows the soil to aerate, prevents rainwater from pooling on the surface, draws water to the base, preserves soil moisture, and breaks up the hard layer, enabling plant roots to grow freely towards the base. This work increases yield.
İlgili ürünler
FOLDABLE V-TYPE OFFSET GOBLE DISCAROV LGD-KV
Hydraulic lift-equipped folding V-type offset disc harrows are trailed machines used to cut and shred crop residues (maize, sunflower, wheat, etc.) and weeds after harvest, and to break up the crust layer.
After harvesting, it prepares the field for direct sowing without the need for another agricultural machine by performing stubble-free soil cultivation during dry months when ploughs cannot be used. In addition to this feature, it can be used for cultivating soil with high moisture content.
The LGD - KV model offset disc harrows move with a hydraulic system and, due to their multi-directional movement capability, prevent wind and water erosion while breaking up stubble. The mechanism on the wheel ensures that the wheel runs at ground level, allowing the working depth to be effectively adjusted.
It has a greater working width than other soil cultivation machines. It is much more economical than other soil cultivation machines because it has a higher working speed and greater working width. Due to these features, fuel, time, labour, maintenance and spare part costs are lower. It reduces the share of soil cultivation in the total cost.
Hydraulic cylinders are used to enable the wings to open and close in working and road positions, allowing tools with a working width greater than three metres to be transported on roads. This enables easy transport in a folded position on roads and narrow transport routes.
MOUNTED ROLLER
Hanging and drawn rollers are used on small plots. Their primary function is to compact the soil. They are used to crush and break up clods that cannot be broken up by soil cultivation tools and to level the field surface. Rollers can be used on the field before and after sowing. When inserted before sowing, they crush the clods of the tilled field, compact the soil, and create a balance between air pockets, regulating the soil's water-air ratio and preparing a good seedbed.
After sowing, they help increase the contact between the seeds and the soil, bringing the water in the lower layers closer to the area where the seeds are located, thus aiding germination.
The materials used in rollers undergo all kinds of inspections and pass through a testing phase before reaching the manufacturing stage, and high-quality materials are used.
Thanks to its design, it is a machine with simple settings and extremely easy to use.
Optional 390 mm and 340 mm diameter flywheels can be fitted.
It can be used both suspended and towed thanks to a pin.
The profiles on the roller flywheels and gear create small depressions on the soil surface, increasing water retention and reducing surface runoff.
X-TYPE SUSPENDED TANDEM DISC HARROW ATD
The X-type suspended tandem disc harrow is used in field and garden cultivation to prepare seedbeds and seedling beds. It shreds plant stalks and residues left in the field after harvest and mixes them into the soil. It breaks up clods formed in the field after using tools such as ploughs, harrows and cultivators and loosens the soil. Thanks to its three adjustable hangers, it can be used comfortably even in wooded areas.
It is an X-type suspended machine that incorporates organic and inorganic fertilisers into the soil, thereby aerating and loosening the soil and maintaining the balance of the soil's water and temperature conditions.
Değerlendirmeler
Henüz değerlendirme yapılmadı.