Single Spring Cultivator
₺100,00
İlgili ürünler
Chisel Plough
Ploughs are used for soil cultivation after harvest without the need for a plough in the field. Due to the structure of their legs, they break the plough layer and are a suspended machine that performs shallow soil cultivation during dry summer months when ploughing is not possible.
Ploughing at a high working depth can be achieved with the plough. This allows the soil to aerate, prevents rainwater from pooling on the surface, draws water to the base, preserves soil moisture, and breaks up the hard layer, enabling plant roots to grow freely towards the base. This work increases yield.
Disc Plough Adp
The disc harrow is a suspended soil cultivation machine primarily used for soil preparation in preparing the seedbed after harvest, attached to the tractor with a three-point linkage system.
Disc harrows operate with the discs rotating in the working position, so they do not get stuck on obstacles. In sandy and stony fields, disc wear is less than that of mouldboard ploughs. As they operate by rotating, they do not require excessive traction power from the tractor and do not strain it. It is a machine with simple settings and easy operation.
Advantages of using a disc plough:
*In moist soils worked with disc ploughs, the wavy structure of the furrow bottom prevents mud formation in the soil.
*The concave structure of the discs breaks up the soil more effectively, preventing clod formation.
*As the discs operate by rotating, they easily overcome obstacles such as stones and hard plant roots, preventing potential breakdowns and blockages.
*As the force distribution related to soil resistance is spread over a wide surface area on the discs, they are resistant to high forces in terms of strength and are not easily damaged.
*As the edges of the discs are sharpened from the outside, they rub against the sharp edge of the plough wall during operation and gradually sharpen themselves over time.
Hanging Type Offset Discarov Aod
The suspended type offset disc harrow is a suspended machine favoured in garden farming and small plots due to its ease of use. The disc direction angles can be easily adjusted on the front and rear batteries.
It is used in secondary soil cultivation, seedbed preparation, inter-tree cultivation in horticulture, weed control, and mixing fertiliser into the soil. It shreds plant stalks and residues left in the field after harvest and mixes them into the soil. It breaks up clods formed in the field after using implements such as ploughs, harrows, and cultivators and loosens the soil.
It is a machine that incorporates organic and inorganic fertilisers into the soil, thereby aerating and loosening the soil and maintaining the balance of the soil's water and temperature conditions.
Inter-Row Spring Tine Cultivator
The row-spacing spring-bladed hoeing machine is used to eliminate weeds between rows of planted crops (such as beet, beans, sunflower, maize, soybean, tomato, beans, melon, and watermelon, etc.) and to loosen the soil. Additionally, it facilitates better incorporation of fertiliser into the soil. These processes accelerate plant growth.
The hoeing machine is adjustable between rows. During hoeing, plant protection discs (star blades) prevent the soil from covering the plants when they are small. Thanks to its leg structure, it can be used easily even on stony terrain.
The soil depth setting of each unit can be adjusted according to the size of the plant to be hoed. Thanks to the units, each of which moves independently, guide discs prevent the machine from deviating and disrupting its direction of movement while maintaining the working depth on uneven terrain, allowing hoeing without damaging the plant even on sloping terrain.
Italian Type Rotary Tiller
The Italian-type rotary tiller is a suspended machine that tills the soil without leaving raw soil between its legs due to the structure of its legs, breaking the plough layer and tilling the soil without bringing the infertile soil in the lower layer to the surface. Italian-type ploughing allows for soil cultivation at a high working depth. This promotes soil aeration, prevents rainwater from pooling on the surface, allowing water to be drawn to the base and preserving soil moisture, and breaks up the hard layer, allowing plant roots to grow freely towards the base. This work increases yield. Additionally, the roller attached to the chassis presses the soil lifted by the discs simultaneously, minimising moisture loss after the operation.
Laser Levelling Machine
Zero, single or double-sloped laser selection option.
High-strength, heat-treated replaceable blades.
Blades designed with the optimal cutting angle for maximum efficiency,
resulting in low pulling force requirements.
All connection points are flanged and lubricated.
Our 3.5, 4, 4.5, 5, 5.5 and 6 metre laser levelling machines offer more balanced and stable operation during levelling thanks to the special side working wheels offered in the system, designed specifically for optional models.
The laser equipment is designed for all kinds of difficult and harsh working conditions
and has a waterproof feature that allows it to operate even under 3 metres of water
.
User manual and film.
All laser equipment is delivered in special cases made of lightweight material that is resistant to impacts and drops.
Easy and quick to set up, durable, laser transmitter stand.
Rototiller
-It ensures that clods, weeds, twigs and vegetable residues formed after the soil loosening process are broken down and mixed homogeneously into the soil.
- Prevents the formation of a base layer by breaking up and loosening the soil.
- Provides more efficient shredding by cutting the soil before the blades thanks to optional breaking legs.
- Variable speed adjustment capability according to transmission speeds of 540-750-1000 RPM.
Değerlendirmeler
Henüz değerlendirme yapılmadı.