Light Model Spring Cultivator
₺100,00
İlgili ürünler
INTER-ROW SPRING TINE CULTIVATOR YÇM YÇM-G
The row-spacing spring-bladed hoeing machine is used to eliminate weeds between rows of planted crops (such as beet, beans, sunflower, maize, soybean, tomato, beans, melon, and watermelon, etc.) and to loosen the soil. Additionally, it facilitates better incorporation of fertiliser into the soil. These processes accelerate plant growth.
The hoeing machine is adjustable between rows. During hoeing, plant protection discs (star blades) prevent the soil from covering the plants when they are small. Thanks to its leg structure, it can be used easily even on stony terrain.
The soil depth setting of each unit can be adjusted according to the size of the plant to be hoed. Thanks to the units, each of which moves independently, guide discs prevent the machine from deviating and disrupting its direction of movement while maintaining the working depth on uneven terrain, allowing hoeing without damaging the plant even on sloping terrain.
PULL-TYPE FIBRE-REINFORCED OFFSET DISKAROV LTD.
A wheeled offset disc harrow with a lift mechanism is a soil cultivation machine used to prepare the seedbed by breaking up clods and mixing the soil after ploughing.
After harvesting, various operations such as cutting and shredding plant residues and weeds, and breaking up the crust layer can be performed with pull-type wheeled offset disc harrows. Their most significant advantage among secondary soil cultivation tools is that they can be used within a wide range of soil moisture levels.
Model ÇLTD offset disc harrows prevent wind and water erosion while breaking up stubble due to their hydraulic system and versatile movement capability. The mechanism on the wheel ensures that the wheel stays at ground level, allowing the working depth to be effectively adjusted.
ROTOTILLER
-It ensures that clods, weeds, twigs and vegetable residues formed after the soil loosening process are broken down and mixed homogeneously into the soil.
- Prevents the formation of a base layer by breaking up and loosening the soil.
- Provides more efficient shredding by cutting the soil before the blades thanks to optional breaking legs.
- Variable speed adjustment capability according to transmission speeds of 540-750-1000 RPM.
SPRING – LOADED LEG DISK HARROW SDH
The spring-loaded disc harrow, with its spring-loaded independent disc structure and machine construction, performs a more effective cutting and mixing process than conventional disc harrows, with each disc operating independently thanks to its separate bearing. The springs on each disc prevent breakages and damage to the frame by allowing the discs to move back and forth when encountering an obstacle. It is less affected by the unevenness of the terrain. It causes almost no damage to the levelling of the terrain. In addition, the roller attached to the chassis presses the soil lifted by the discs at the same time, minimising moisture loss after the process. The machine can operate comfortably in heavy clay soils.
VERTICAL ROTARY TILLER
The vertical rotary tiller uses blades positioned vertically in the soil to perform a circular rotation, breaking up clods on the soil surface, loosening the soil surface, and expanding the inner surface of the soil. It also works by mixing the soil without turning it over, and since the soil surface is evenly distributed during operation, moisture balance is maintained.
It breaks down the stubble remaining on the soil surface after harvest, allowing it to mix easily into the soil.
The blades are made of special steel that has undergone hot rolling, resulting in high wear resistance.
Thanks to the specially designed gearbox (1000 rpm) and the different positions of the rotors, the blades enter the soil slowly even in heavy and compacted soils, thus minimizing power consumption and vibrations.
The spring bearings of the side guards increase the lateral movement of the belts.
Protective hoppers are available to prevent any soil clods, stone fragments, plant debris, hoses, or other obstacles from entering the space between the rotor shafts.
The height-adjustable roller of the vertical rotovators ensures a constant working depth.
Locally produced, robust, powerful, and high-performance vertical rotovators cater to all tractor power levels with various working width options.
VIBCOM
Vibcom is a two- or three-row seedbed preparation machine that combines multiple soil cultivation operations in a single pass at high speed. It is the right choice for warming the seedbed before spring. The choice of machine configuration ensures versatility in use. It is adjustable to a depth of up to 17 cm. It is manufactured in various working widths ranging from 2.5 metres to 8 metres.
The model with three rows of vibrating snake tongues (ideal for clay soils) prefers dense and shallow sowing, allowing the soil surface to warm up and aerate before sowing without mixing the deep soil. The double-row model with 25 cm wide claw shoes achieves an aggressively tilled, fragmented surface layer.
Vibcom ensures a perfectly level area, enabling rapid seedbed preparation and creating the ideal conditions for uniform crop establishment.
Değerlendirmeler
Henüz değerlendirme yapılmadı.