ITALIAN TYPE ROTARY TILLER
₺100,00
The Italian-type rotary tiller is a suspended machine that tills the soil without leaving raw soil between its legs due to the structure of its legs, breaking the plough layer and tilling the soil without bringing the infertile soil in the lower layer to the surface. Italian-type ploughing allows for soil cultivation at a high working depth. This promotes soil aeration, prevents rainwater from pooling on the surface, allowing water to be drawn to the base and preserving soil moisture, and breaks up the hard layer, allowing plant roots to grow freely towards the base. This work increases yield. Additionally, the roller attached to the chassis presses the soil lifted by the discs simultaneously, minimising moisture loss after the operation.
İlgili ürünler
BRANCH CUTTING
It shreds the stalks of plants such as wheat, sunflower, cotton, corn, and rice, as well as tree branches left behind after harvesting in orchards, vineyards, and fields into small pieces, thereby increasing soil fertility.
It prevents yield loss after stubble burning.
It provides long and enjoyable blade usage thanks to its high-strength blades.
The retaining blades placed in front of the roller enable the re-cutting of long pieces.
The branch cutting size can be adjusted thanks to the side rails on the equipment and the height-adjustable roller.
Hydraulic shifting facilitates ease of use in gardens and under trees.
Front guard plates enable easy cutting by laying down long plant stems.
540 rpm PTO; transmission system with 2000 rpm rotor speed.
COPYROLL
COPYROLL rollers are designed for pre-sowing soil preparation, particularly in heavy and dry conditions.
COPYROLL rollers are used to level the surface, break up clods and prevent soil compaction.
The machine can also be used after sowing. This process ensures the homogeneity of seed formation and a perfectly flat field, ready for uniform crop formation.
- With its robust machine chassis, it is perfectly suited to heavy terrain conditions.
- Simple transition between the machine's working mode and transport mode
- Stability during transport thanks to the transport axle and low centre of gravity
- COPYROLL high casting quality,
- Ability to perform a wide range of optional adaptations,
- Load from the centre frame to the wings via the hydraulic system for even mass distribution,
- Good displacement and seed-to-soil contact,
- Ensures uniform seed depth, resulting in plants of equal size.
- Combines technical expertise and craftsmanship with innovation, thoughtful design, and rigorous testing.
FOLDABLE V-TYPE OFFSET GOBLE DISCAROV LGD-KV
Hydraulic lift-equipped folding V-type offset disc harrows are trailed machines used to cut and shred crop residues (maize, sunflower, wheat, etc.) and weeds after harvest, and to break up the crust layer.
After harvesting, it prepares the field for direct sowing without the need for another agricultural machine by performing stubble-free soil cultivation during dry months when ploughs cannot be used. In addition to this feature, it can be used for cultivating soil with high moisture content.
The LGD - KV model offset disc harrows move with a hydraulic system and, due to their multi-directional movement capability, prevent wind and water erosion while breaking up stubble. The mechanism on the wheel ensures that the wheel runs at ground level, allowing the working depth to be effectively adjusted.
It has a greater working width than other soil cultivation machines. It is much more economical than other soil cultivation machines because it has a higher working speed and greater working width. Due to these features, fuel, time, labour, maintenance and spare part costs are lower. It reduces the share of soil cultivation in the total cost.
Hydraulic cylinders are used to enable the wings to open and close in working and road positions, allowing tools with a working width greater than three metres to be transported on roads. This enables easy transport in a folded position on roads and narrow transport routes.
VIBCOM
Vibcom is a two- or three-row seedbed preparation machine that combines multiple soil cultivation operations in a single pass at high speed. It is the right choice for warming the seedbed before spring. The choice of machine configuration ensures versatility in use. It is adjustable to a depth of up to 17 cm. It is manufactured in various working widths ranging from 2.5 metres to 8 metres.
The model with three rows of vibrating snake tongues (ideal for clay soils) prefers dense and shallow sowing, allowing the soil surface to warm up and aerate before sowing without mixing the deep soil. The double-row model with 25 cm wide claw shoes achieves an aggressively tilled, fragmented surface layer.
Vibcom ensures a perfectly level area, enabling rapid seedbed preparation and creating the ideal conditions for uniform crop establishment.
X-TYPE SUSPENDED TANDEM DISC HARROW ATD
The X-type suspended tandem disc harrow is used in field and garden cultivation to prepare seedbeds and seedling beds. It shreds plant stalks and residues left in the field after harvest and mixes them into the soil. It breaks up clods formed in the field after using tools such as ploughs, harrows and cultivators and loosens the soil. Thanks to its three adjustable hangers, it can be used comfortably even in wooded areas.
It is an X-type suspended machine that incorporates organic and inorganic fertilisers into the soil, thereby aerating and loosening the soil and maintaining the balance of the soil's water and temperature conditions.
Değerlendirmeler
Henüz değerlendirme yapılmadı.